The hood of your dryer vent, situated on the the surface of the house, requires a beating in the elements and over time can seem grungy. It’s possible for you to provide the vent a make-over pretty effortlessly, but remember that the vent is a high-humidity area â one usually vulnerable to mildew â as you you choose your paint. Choose a shade that accents the foundation or trim colour of your home, and go using a hue that is light to keep your dryer vent as great as possible on days that are sunny.
Scrape the the top of vent hood using a paint scraper to remove paint, rust or other kinds of buildup.
Sand the area of the vent utilizing large-grit sandpaper for either steel or plastic vents. Rub the sand-paper in one path over the whole area of the vent to inspire paint adhesion.
Scrub the vent that is sanded with an abrasive sponge and bleach. Rinse it with water that is clear and let it air dry.
With masking tape trim the border of the vent.
Apply one coat of moisture-resistant primer to the sanded and clear area of the vent. Paint the primer on with long strokes.
Allow the primer to dry according to the directions of the manufacturer’s. Sand the area of the vent again, utilizing fine- .
Coats of mildew- exterior paint, even and utilizing strokes as you did for the primer program. Use a nylon- brush for latex paint. If using spray-paint, apply an even coat; support the 6 to 8″ in the vent and sweep easily in a straight back and forth movement to the nozzle. For either kind of paint, use a thin coat that is original as opposed to a coat, that might lead to drips.
Allow the first coat to dry for approximately an hour according to the directions of the manufacturer’s, and use two or one more slim coats of paint.
Allow the vent before working your dryer to dry for a-T least 2 4 hrs.