Home Painting

Walk-Through Checklist for a Vacating Renter

You are vacating a rented property and if you receive your security deposit again is contingent on the unit passing inspection. Utilize exactly the identical check list that the landlord signed when you moved in and allow it to be the guide when you leave. The concluding walk-through is the real key to getting all or a portion of your deposit . The more amazing the house is through the check-out the better impression you’ll make.

Assess Together With the Landlord

Filling in the check-out list by yourself presents just one side of this story. Have the his or her representative with you to cover the house and be sure he signs off with the things on your list. Take photographs for back up. Make sure you keep a copy of the final list, signed by the landlord as well as yourself.

Total Appearance

All rooms should be clean with no litter or debris evident. Insides of closets, cabinets, medicine chests and laundry centers have to be clean and filtered. Floors should show no signs of discoloration. Wipe the front door so that it poses a positive welcome and clean the area coming to the house. Check light fixtures and be sure all have bulbs.

Windows and Coverings

Wash the windows on the interior and should you have sliding doors leading out, wipe all of panes. Be sure no bugs or dirt are on window sills. Damp clean the dividers and vacuum draperies of dust.

Walls

Fill image hanging holes then sand flat. Vacuum following sanding, and in case you’ve got the ideal paint, then use it to touch up walls, baseboards and railings. It is not necessary to completely repaint the unit but be certain the walls are clean and without any harm.

Baths

Clean the baths, including the bathtub and toilet. Make certain no mold is about the grouting and that the area sparkles and smells great. Eliminate all soap bars and wipe away any soap scum. Leave a roll of toilet paper in the holder. Wipe the air extractor and the ground. When there’s a shower curtain, wash it before checking out, or clean the glass shower doors and the track they are in.

Kitchen

Clean the oven and stove top, such as any roasting pans that stay with the oven. Remove everything from the refrigerator and wipe down all the shelving, including inside the freezer. All cupboards should be wiped with a damp cloth, indoors and outside. Eliminate the extractor filters and wash them in warm water. Leave the countertop spotless and the rest of the appliances ready for a new tenant.

Final Check

Walk in the unit and examine it as a new tenant would. If it looks clean, smells great and is as presentable as possible your check list is complete. Switch in the keys and clickers, and be certain the landlord signs on them.

See related

Home Painting

The Way to Paint a Panelled Room

Older homes may come complete with wood paneling in many rooms. At once a popular design element, paneling is dim and provides a room an obsolete feeling. Eliminating paneling can be costly and time-consuming, often between replacing drywall and plaster. A far easier approach to take care of the problem is to paint it over, giving the paneled room a fresh new appearance.

Prep the area. Cover floors with drop cloths. Mask off with painter’s tape the windows, doors and moldings. This measure will help to eliminate drips or paint smears. Painter’s tape is easily removable and won’t hurt already painted areas in the room.

Wash paneled walls using a cleaner and a degreaser according to the instructions on the packaging. This measure removes dirt, dust and sticky substances from the paneling, allowing the paint to be consumed readily. Wear protective gloves and eyewear. Make certain you keep the room well ventilated. Allow the paneling completely dry before proceeding to the next measure.

Sand that the paneling. This measure is very critical as it removes the glossy surface and”roughs” it up slightly, allowing the paint to adhere to surface. Make sure you wear protective eyewear and gloves when working with a sander. An end sander or a oscillating instrument fitted using a sanding accessory and fine-grit sandpaper will provide you a smooth coating. Sand the entire paneled area. If necessary, use a rotary instrument fitted with a sanding disk or wheel to sand by hand any indentations from the paneling the finish sander might not achieve.

Wipe the walls using a tack cloth to get rid of fine sanding dust that will remain on the walls.

Paint the paneled walls using a primer . The primer will be absorbed into the wood and will seal any present colour or stains that might want to come throughout the paint. Make sure every indentation is covered with primer as well. You might want to use two coats of this primer to completely seal the paneling, based on how dry it is. Allow the primer to dry thoroughly between coats.

Apply the finish coat of paint colour to the walls that are underperforming. Again, you might want to use two coats of paint based upon the coverage of the primer coats. Allow the paint to dry thoroughly before removing the painter’s tape and drop cloths.

See related

Home Painting

How to Preserve a Concrete Statue

Concrete garden art accents your landscaping with designs that express your style, but these concrete figurines need care exactly like your own plants. In the concrete, weather elements wear away As time passes if it is not sealed. Extreme temperatures also affect the integrity of the cement. Cold winter temperatures specifically can cause cracking in art. Maintaining concrete statues doesn’t expect a lot of effort, but the payoff comes in a piece that stands up through the years.

Blow off dirt the statue off. Spray the statue with a garden hose to remove additional debris or dirt. Wash out the statue every few months so the dirt and debris don’t build up on the surface.

Apply a thin coating of Portland cement to cleaned and dampened areas that are cracked or chipped. Wet your finger to smooth out the cement. Allow the cement to dry for two hours. Mist the fixed area gently with plastic wrap. Mist the fixed area daily and replace the plastic wrap for five times.

Brush a watertight concrete sealer over the surface of a clean and dry statue. Allow the decoration to dry for at least 24 hours or per the directions on the brand new container. Apply another coat of sealant if needed to completely cover the cement. Leave the base of the statue unsealed to enable the concrete to breathe. Apply more sealer to some statue every year.

Empty water before winter if the statue includes a fountain or birdbath. Remove the bowl of this birdbath or cover it with a board. Remove the pump from the fountain if current.

Move the statue into an indoor location if possible for the wintertime. Lift the bottom of this statue off the ground if you leave it outdoors. Use wood or tiles to separate the statue from the ground.

Cover the statue throughout the winter with a tarp if you leave it outdoors. This can protect it from the weather. Secure the cover with string so that it will not blow off the statue.

See related

Tropical Style

How Long Does Ortho Weed-B-Gon Take to Work?

Weeds are the bane of any gardener’s existence, frequently growing more vigorously than the desirable plants and grass in the landscape. At flowerbeds, you can frequently keep them under control with dedicated weeding sessions, ripping out their origins by hand. But when they begin taking over your lawn and every pavement crack, it may be time to break out the herbicide. Ortho Weed-B-Gon will destroy weeds before they wreak havoc on your garden.

Weeds in the Grass

The most troublesome kinds of weeds to eliminate are the ones which grow in your lawn, because you run the risk of not only killing the weed but also the rest of your grass too. Weed-B-Gon Weed Killer for Lawns Plus Crabgrass Control may be applied to your lawn any time weeds are actively growing. Active ingredients are .10 percent quinclorac, .22 percent MCPP-p, .12 percent 2,4-D and .05 percent dicamba. Be sure the daytime temperature is over 45 degrees and under 90 degrees Fahrenheit when applying, and wait an hour following application to water your lawn. Most weeds will show signs of wilting or yellowing of new development within a day of application. Necrosis will disperse, turning hardened brown and also killing them within 14 to 28 days. If seeds were completely developed before the weeds die, they will continue to be feasible, however. This means new weeds will crop up from seeds, requiring additional treatment. If you’re dealing with particularly stubborn weeds, another application two to three weeks afterwards may be necessary also.

Weeds in the Landscaping

Grassy weeds which populate your landscaping can be tough to remove by hand. In tiny flowerbeds, it is possible to manually get rid of the grass, but bigger areas may need an herbicide such as Ortho Grass-B-Gon Garden Grass Killer. Its active component is 0.48 percent fluazifop-p-butyl. For best results, spray weeds anytime they’re actively growing and repeat again seven days later to control crabgrass, quackgrass and Bermuda grass. Grass-B-Gon may be safely used around ground covers, plant beds, landscapes, flowers and shrubs and also works within one to four weeks following application.

Weeds in the Pavement

Weeds in pavement cracks, along fences and driveways are a lot simpler to kill because you don’t have just as much surrounding vegetation. Ortho GroundClear Vegetation Killer works in such spots. Its active ingredients are .016 percent imazapyr and 1.0 percent glyphosate. For smaller regions, the ready to use formula can be sprayed on weedy offenders when they’re actively growing. Best results are achieved when implemented on a sunny day once the temperature is between 45 degrees and 85 degrees F. Long Sensors must be cut down before application. Weeds will yellow and wilt within 10 hours. They’ll be dead in one to two weeks and shouldn’t grow back for a single year.

Cautions

Don’t use Ortho GroundClear over root zones of trees of shrubs or even where it is likely you might later plant. On clay soils, the product deposits may remain in the ground for up to one year. When using any herbicide, follow all mixing directions and safety precautions printed on the tag. Keep children and pets from the region until the spray has dried.

See related

Tropical Style

Why Do People Hang Milk Jugs From Apple Trees?

Insects can be a major issue if you’ve got an apple tree, with pests like apple maggots causing significant harm to both your own fruit and the tree itself. Sticky traps are often used to protect against insects but provide little protection against flying pests. Homemade traps made from milk jugs provide extra protection for your trees, luring both crawling and flying insects in and killing them before they can escape.

Jug Traps

Milk jugs hanging out of apple trees and other fruit trees are used as traps to catch and kill pests that would otherwise damage the trees or fruit. Insects are lured to the jug with a sweet liquid bait solution and are not able to escape. The trapped insects become coated in the bait solution and finally drown within the trap. You can make traps of different sizes using half-gallon or gallon jugs, depending on the size of your trees.

Trap Solution

There are numerous strategies to produce an effective way for jug traps. Most liquid bait solutions are created using either sugar or molasses combined with water in a 1:10 ratio to make a syrup. Some options also include apple cider vinegar, reducing the amount of water and creating a more intricate bait. Other organic materials, like diced banana peels, are sometimes added as well. Solutions can be reached in advance and stored in a separate container, allowing you to add solution to hanging traps in an as-needed basis without having to make more.

Earning Jug Traps

Milk jugs need minimal if any modification before they can be used as jug traps. While it is not necessary to cut the jugs, cutting holes in the sides of the jugs makes it even easier for flying insects to enter the trap and allows the trap to be refilled without removing it from the tree. These holes should be large enough at the sides of the jugs so that you are able to place at least 1 inch of bait solution in the trap without spilling.

Protecting Apple Trees

Hang jug traps from sturdy branches on the apple trees you would like to protect, using twine or other sturdy string. For smaller trees, a single jug trap provides adequate protection; large trees must have at least two or three traps. If there are no holes cut into the sides of the jugs, position the open mouth of the jug close to the division and tie the jug close to the trunk. Check the jugs every couple of days emptying and refilling them if a significant number of dead insects roam in the bait option.

See related

Tropical Style

Can You Cut the Top Off of a Madagascar Palm to Propagate Multiple Growth?

Madagascar palm (Pachypodium lamerei) is also an unusual plant that’s really a succulent in the dogbane family and isn’t related to authentic palms. Native to southern Madagascar, this tender perennial is hardy to U.S. Department of Agriculture plant hardiness zones 9a through 11 and can be grown in cooler climates if overwintered indoors. It is often grown as a houseplant. This species typically grows in the kind of a single trunk, but it occasionally branches after flowering or in the event the main stem is wounded.

Identification

Madagascar palm is notable because of its thick gray trunk and long spines. In the landscape, this tropical species can reach up to 15 feet high and has a slim, straight contour with spirally arranged leaves at the apex. When grown indoors, this plant stays much smaller and contains a spindle-shaped back up. Madagascar palms have big, dark green leaves with a leathery surface and bear white flowers with spiralling petals in late spring to early summer.

Natural Branching

Branching occurs naturally in Madagascar palms that have suffered from some sort of injury, like frost damage. Mature plants also occasionally branch without becoming damaged. This occurs mostly in older specimens and typically happens shortly after booming. Outdoor Madagascar palms are more likely to blossom and to division naturally than those grown indoors. Small branch-like offshoots also occasionally look in the base of the plant and these new limbs can be eliminated to produce a new plant.

Induced Branching

You might have the ability to induce branching at a Madagascar palm tree by cutting the top of the plant. This procedure requires injuring the middle of the spiral from which the leaves normally grow, so the plant produces two new functions. Cut the plant with a clean, sterile knife or shears to reduce the risk of infection. While many Madagascar palms recover, there’s always a possibility your specimen won’t regrow after cutting.

Factors

You may increase the possibility that your Madagascar palm will division by providing it with perfect ethnic ailments. Planting in full sun, providing temperatures over 60 degrees Fahrenheit year old and using an extremely well-drained growing medium promotes outdoor plants to develop the extensive root system necessary for branching. Ideally, these crops must receive regular watering throughout the summer and stay relatively dry throughout the cool season to discourage frost damage and produce an extremely healthy specimen.

See related