Parquet flooring can bring amazing timber floors up a notch with its incredible detailing. So many designs are now available, in the traditional brick or basket appearance to upgraded chevron and herringbone designs. Each beautiful and intricate design can add interest and value to your property.
Originally a French feature dating from 1684, parquet flooring is made of solid blocks of hardwoods, laid over tie pubs in square, triangular or lozenge layouts, then nailed in place. This manner of flooring became increasingly popular with the wealthy, as it did not trap moisture and encourage rotting joists the manner marble flooring did. Today this elegant design can add historic interest to modern, modern or traditional homes.
Definitions. Purists use the term “parquetry” to reference wood flooring or furniture using angular and geometric patterns, while “marquetry” identifies curved shapes. “Parquet” is the expression used for flooring. These days any kind of woodblock floor layout can be known as “parquet flooring”
Shown: This timeless basket-weave, panel parquet flooring remains is one of the most popular designs. Within this sophisticated setting it grounds the room when harmonizing with the glazed French paneling.
Designed To Appeal
Selecting your wood. Shop around to your parquet flooring. Timber choice is just as important as design.
Is the timber domestic or exotic? Is it solid or engineered? What’s the overall thickness and length of the wood? Will the wear coating work for high-traffic locations? Is the wood finished in gloss, semigloss or wax? Choose the materials and finish you need before settling on your own design.
The most important issue when choosing your flooring is the wear coating. Every other detail is about personal choice. If you know you can repair and refinish your parquet flooring again and again, you’ll have spent your money wisely.
Shown: The brick layout used within this parquet flooring instantly informs us this is 21st-century architecture.
Global Hotel Resources LLC
Utilizing engineered timber. In case you choose to use engineered hardwood to your parquet floors, keep a few things in mind. The thickness of the floor can range from 10 to 20 millimeters complete. Since the surface is actual wood, it should be as thick as you can. When the surface is thinner compared to .6 millimeters, it makes it very hard to refinish after harm. Aim for the top layer of the veneer to be between 2 and 6 millimeters.
The layers under the veneer also matter. There can be three to 12 layers of plywood and unfinished wood, so request as many layers as your budget can handle for the best strength and durability.
Shown: The panel parquet floor within this Scandinavian-inspired area has a lozenge (diamond) design accomplished in a modern manner.
Block versus panel. Should you decide on solid wood at a block or plank design for parquet flooring, it is worth buying a business that does technical installations.
Panel parquet flooring uses preassembled squares in prearranged patterns; block parquet flooring has individual pieces of parquetry, precut in custom lengths and widths. In both methods, each individual block or panel is glued and pinned to a plywood substrate onsite. The pieces are then coated and finished with all the desired lacquer.
Shown: At a highly conventional setting, parquet flooring contrasts with tiles may help divide darker timbers.
Finishing parquet flooring. The finish you select requires careful thought. A film-forming product such as varnish works good for high-traffic areas. Polyurethane varnishes in matte, satin or gloss finishes are normally the most frequent — all need around two to three coatings. Penetrating oils, such as a wax finish, improve the appearance and texture of natural timber and dry to a satin matte sheen.
In case your parquet flooring is constructed from unfinished solid hardwood, allow at least 36 hours for the glue to cure before applying clogs or clogs.
Shown: Increasingly popular, this totally modern chevron (also called a stage de hongrie) design is simple but highly effective.
Gluing. The glues used for placing parquet flooring can vary in quality, so it is best to take advice from the installer. If parquet flooring is applied directly over a concrete slab, then make sure to use two coats of epoxy membrane so the wood doesn’t buckle from moisture later on.
Both panel- and – block-style parquetry pieces will need to take a seat in the room for at least 72 hours before installation so the wood can adapt to the room temperature.
Shown: The different tones of this Brazilian walnut block parquet flooring pop in a herringbone design. The border defines different spaces at the long hall.
Anthony Baratta LLC
Figuring out the design. When a parquet design is highly complicated, the most important purpose is to keep the parquet squares symmetrical with all the walls.
In this photograph, the staircase functions as the focus of the room, hence the pieces necessary to be lined up using the staircase rather than the walls. A boundary was inserted into the periphery of the floor, to assist with this.
Shown: The high-gloss varnish on this floor makes for an extremely hard-wearing surface — great in an entry hall which sees a lot of traffic.