The Difference Between Sateen & Cotton Thread Counts

The satin weave utilized to make sateen sheets — that can be usually made from cotton — offers a lustrous and silky smooth feel. Typically made from combed cotton, the satin weave puts more threads on the surface of their sheets, which is exactly what makes them feel so soft. The type of cotton at the sheets determines that the caliber of the sheets, maybe not the thread count, since manufacturers do not count threads in a standardized way.

Thread Counts

Thread count refers to the number of threads per square inch at a bit of fabric. Sateen sheets are sold in several thread counts, ranging from 120 to 1,000, just as with other sheets. But since the government doesn’t regulate thread counts, the maker can twist several thinner threads together to make the thread count bigger, that can be misleading when it you are trying to buy quality sheets. Of the sheets examined by Consumer Reports in 2013, a 280-thread-count percale sheet — with a plain scoop — done the best against sheets with greater thread counts.

Fabric Weaves

To make fabric, manufacturers start with the threads, and the manner in which the threads entwine and interlace determine the fabric’s weave. For example, a plain weave has one thread over and one thread under. The horizontal pattern in the weave refers to the weft threads — also known as woof — although the vertical threads in the weave refer to the warp. In a satin weave, the kind used to earn sateen sheets, one warp thread passes over at least four weft threads, bringing more of the thread face to the surface, creating a soft luster finish.

Cotton Types

Not all of cottons grow evenly; the kind of cotton employed in the sheet determines the caliber of the sheet. A few cotton bolls produce fibers or staples only 1/2 inch extended, while the highest quality sheets only utilize cotton in extra-long staples of around 1 1/2 inches or more. Of the five types of cotton — Egyptian-grown ELS cotton, American upland, Sea-Island, Asiatic and American Pima — appear to sheets produced from American Pima or Egyptian cotton for the highest quality, long-staple cotton.

Sateen Sheets

Even though sateen sheets offer a luxurious and silky texture to the sheet because of the satin weave, they tend to pill, snag, catch or tear easily because of the exposure of their warp thread. Sateen sheets also utilize combed cotton — a process that eliminates the shorter strands — rather than just extra-long staple cotton, that has longer threads, even though it is a higher quality cotton. To prevent pilling, wash your sateen sheets.


How to produce an Organza Light Curtain

Create a constellation at a window, a starry backdrop to your headboard, or also a celebratory sparkle behind a headset table with LED light strings and a few organza curtains. Light shining through the sheer organza has an otherworldly shine and glimmer. LED lights are cool enough to place near fabric — the lights won’t even heat the cloth if they touch it. The setup can be as temporary or as durable as you like — it takes minutes to set up and disassembles just as speedily. Surprise your fairy princess, sprinkle some magic above a wedding reception, treat yourself to a bubble bath among the stars with an organza mild curtain.

Put two curtain poles over a window or around the wall behind a bed, reception table table or a different location, for the lighting curtain. Place the second rod slightly below the pole for the curtains.

Plug the lighting curtain into the nearest wall socket — use an extension cord in case the lighting cord won’t achieve easily. Connect the second and third light curtains to the first to get a broad space.

Thread the curtain pole in and out of the strings of the lighting curtain so that the strands of mild hang from the pole. Alternating one strand one in front of the pole. Secure the strands to the curtain pole with clear cable ties if needed. Hang the pole at the curtain pole holders and unplug the lighting curtain.

Collect one or two sheer organza curtains on the next pole by shirring the sleeves onto the pole. Arrange the gathers so they are evenly dispersed and hang the organza cloth on the top curtain pole.

Plug from the lights if you would like to light the lighting curtain.


The way to Decorate a Carriage Bed

You can find metal carriage bed frames online using curved or round canopy tops. Bring the bed to life with fairy lights — micro LED string lights about the size of a grain of rice, available in a variety of lengths and colors. Pink, white or multicolored fairy lights include a magical glow and make a convenient nightlight for a young princess who fears a bedroom that is dark. Once the bed frame has been put together, allow the fun begin with fabric and bedding fit for royalty.

Turn the fairy lights on to hang them so you know how bright they are. Hang the fairy lights along the canopy frame. Wind the cord around the slender metal rods. Secure the lights in select places if needed with little plastic clips or white twist ties.

Utilize tulle, sheer cloth or canopy panels to surround the canopy frame in a utter veil. Bend the canopy across the opening of a round frame with satin ribbons. Utilize the grasses to link the canopy at every corner post on a rotating bed frame.

Make the bed using fairy or princess themed bedding. Scatter satin and furry accent pillows across the bed. Drape a satin or coat throw in the bottom of the bed.


My Harmony HRT 216 Yard Mower Won't Start But Has Spark?

The Honda Harmony II HRT216 is a 21-inch push lawnmower having a Honda GCV160 engine. Like other mowers and power equipment, occasional difficulties may come up, including a neglected start. If your engine has spark however still won’t begin, a fast troubleshooting session can help get you back up and running before your grass for example in Salt Lake City gets out of control.

Fuel Issues

While fueling seems like a simple task, fuel issues are a major reason for starting problems. Ensure the fuel valve is switched into the “on” position prior to starting. Faulty fuel, often a result of storing the mower with fuel inside, is one of the first things to examine. Don’t keep fuel in the tank for an extended time period, particularly without a fuel stabilizer, especially if you’re storing it until the following season. When fuel gets stale, it oxidizes and causes accumulation in the carburetor, fuel lines and much more. Unfortunately, hard starts aren’t the only problem stale fuel can cause; you may run into issues with your carburetor or alternative fuel system components that can be costly to fix or replace. If you have stored your fuel or mower for more than a month, drain the gas tank and then fill it with fresh, clean gasoline.

Throttle Issues

Based on Plano Power Equipment, a rather common reason for a tricky beginning in Honda mowers is the throttle cable being stretched out. If this cable is stretched out or differently from adjustment, it will become tough to begin a cold engine because the choke won’t close. When starting a cold engine, always transfer the throttle to the “choke” position; the throttle lever should be in “quick” for a warm beginning.

Carburetor Issues

Unfortunately, carburetor issues can lead to a neglected start though you’re getting spark. Stale fuel may still be the issue; before storing, drain the carburetor bowl by removing the drain bolt and turning the gas valve into the “on” position. Some carburetor issues are more serious than stale fuel; should you suspect the carburetor is damaged in any way, take your HRT 216 to a licensed Honda service center.

Other Problems

If your mower still wo not begin, you could have a clogged fuel filter, stuck valves or an ignition error. Honda recommends taking your mower to an authorized Honda servicing dealer; if you are handy and know your way around little engines, then you can look in the shop manual for replacing parts or directions on the best way to repair certain components.


Soundproofing a Bedroom Wall From a Noisy Air Conditioner

Every time a noisy air-conditioning unit sits on the other side of your bedroom wall, the sound might be a bit too loud. In case the humming, squeaking and knocking of your air conditioner keeps you up at night, you will find things you can do, short of replacing the unit, then to minimize the noise. If you’re really determined, you can effectively soundproof the entire room.

Media Matters

Sound waves travel through several media, including atmosphere and solid objects. In the case of atmosphere, any openings in the wall between you and the atmosphere conditioner let in sound. Reverberation, or echo, is critical, also. With mass, or even solid objects, the less dense an object is — your outside wall, like — the more it transfers sound. You might have discovered that masonry houses generally are far more soundproof than frame constructions.

Noisy Air

Sealing openings around doors and windows not just blocks air leaks, it blocks sound. Caulk openings, inside and out. Windows and outside doors should shut tightly, so replace faulty locks and weatherstripping. Fill holes and cracks in exterior masonry, and interior masonry and plaster. Use acoustical caulk or foam backer rod to seal the gap between the floor and the baseboard, and precut foam pads to insulate electrical outlet covers. Even a tightly sealed window may be a large source of infiltration. Sound cannot travel through a vacuum, so look at replacing windows with vacuumed-sealed double glazing. Many manufacturers offer specially made, sound-reducing window versions. Do not caulk closed an escape window.


Any air conditioning sounds which enter the bedroom echo hard surfaces, magnifying the acoustical impact. Wall-to-wall carpet makes a large cut in sound reverberation. Hanging soft furnishings on the wall is an age-old way of insulating against both sound and hissing. Hang tribal rugs, tapestries and quilts to beautify and quiet the bedroom. Heavy curtains you may shut at nighttime play their role, also, as does a large, upholstered headboard and upholstered seating.

Mass Is Key

An effective way to dampen noise is to add bulk between you and the atmosphere conditioner. Insert sound-deadening density by installing a layer of acoustical masonry to your inside surface of this outside wall. You might need to remove afterward replace trim moldings from the procedure. After you complete the drywall and reinstall the woodwork, caulk the gaps. For superior soundproofing, use acoustical caulk between the old wall and the new drywall to decrease the transfer of sound waves to the panel. Heavy, solid-core doors additionally are far more soundproof than hollow-core doors, as are solid-wood window frames.

Whole-Room Soundproofing

If you still can not get peace, repeat soundproofing steps on all the walls along with the ceiling. Insulate electrical outlets, switches and overhead junction boxes with acoustical wrap. The undertaking can get complicated, so consider having a licensed contractor perform the job. As an example, you’ll also need to remove all of the moldings, recut them, and then reinstall them above the new drywall. Electrical boxes also must be reinstalled on top of the new drywall.


How to Install Glass Tile Accents

The process for installing glass accent tiles isn’t noticeably different from other sorts of tiles, however, the easily scratched surface, inclination to chip through cutting and the transparent quality of glass shingles mean that a few special considerations are necessary. The affordability and broad variety of glass tiles makes them value the additional effort.

Narrow the Options

Consider what level of use the glass tiles will need to endure. Eliminate tiles that scratch easily if you will install them in places subject to a lot of wear and tear or require constant cleaning, like flooring or countertops. Choose a finish and look, like shiny, matte, clear, iridescent or solid, as well as size and shape. Compare the depth of the glass accent tiles into the surrounding tiles. Installation will be simpler if they’re exactly the same depth, but it is possible to build up the thin-set supporting the narrower tiles if necessary. If the surrounding shingles have been already installed, don’t pick glass tiles thicker than people around them.

Lay Out a Layout

Glass tiles commonly come in sheets using mesh backing, but it is possible to cut the mesh and use tiles individually to create your own design. Compare the size of the mesh components to your planned design to determine whether it may save time or money to adjust the size of your design to the size of the mesh. If you are creating a custom design using individual tiles or tiny sections of a mesh-backed grouping, lay the design from the planned space to be certain it fits and looks how you intended. Sometimes mesh will reveal through the rear of glass shingles, especially if they’re colorless; clear and paper-faced shingles may be more appropriate. Paper-faced tiles have a paper coating on the very front, and that you remove after putting the tile. This paper makes it difficult to see the design before placement, but eliminates the issue of mesh showing through clear glass.

Making the Cut

Wear safety equipment like heavy leather gloves and eye protection when cutting glass tiles. Use a tile cutter made especially for cutting glass for tiles that are 2 inches or smaller. For larger tiles use a wet saw. Cut partway through from the bottom, turn the tile over, and complete the cut in the top. Sand the edges as necessary to remove any remaining sharp edges.

Thin-set and Tile Thickness

Choose a white thin-set or brick for transparent glass tiles, unless you want a darker color to show through the glass. Use the thin-set into the backing and after that smooth out it, removing any texture or bubbles, which will demonstrate through tiles that are clear. In the event the glass accent tiles are far slimmer compared to the surrounding tiles, construct up the thin-set in order that the glass tiles are flush with the adjacent surface.

The proper Grout

Epoxy grout is excellent for use with glass tiles. It won’t scrape the surface, expands and contracts as required and is strong and durable. Select a shade that improves the glass shingles and doesn’t compete with or divert from them. White or ivory works nicely with most accent tiles. Avoid sanded grout, which can scratch a few delicate glass shingles.


How to Fix a Cracked Fiberglass Shower Stall

Even though a fiberglass shower stall usually can’t bend contrary to the framing enough to decipher smoothly, the sharp and focused effect of a substantial object can be sufficient to decipher it. It’s important to repair cracks in the wall or pan as soon as you detect them, since they can permit water to leak into the framing, and it does not take long for the water to rot the wood. An epoxy repair program works best for wall repairs, yet to repair a cracked pan, then you should rely instead on a custom-made add for strength.

Put on goggles, a respirator and gloves, and turn on the Designer Bathroom Concepts Pittsburgh exhaust fan. Grind a bevel about 1 1/2 inches wide centered on the crack with a rotary instrument and an 80-grit sanding attachment. The purpose of the bevel is to provide surface area to that the fiberglass repair tape can stick.

Lay cellophane tape across the boundaries of the bevel to keep the repair materials off the undamaged surface of the stall.

Mix epoxy fiberglass repair leaf using the hardener that comes with it from the proportions recommended by the producer. Spread it inside the bevel with a little paintbrush.

Cut a piece of 9-ounce fiberglass cloth from a roll that’s wide enough to fill the bevel, wet down it with the epoxy and then lay it about the crack. Cut a smaller piece of tape, wet it down and lay it on top, then lay an even smaller slice on top of that one. The last piece of cloth should come flush with the surface of the stall.

Permit the epoxy to cure overnight, then blend enough two-part polyester fiberglass filler to cover the repair. The filler is similar to auto-body filler. Choose a shade that fits the shower stall. Mix it with hardener and then trowel it on with a plastic putty knife. Let it cure for 20 to 30 minutes, then sand it flat with 120-grit sandpaper.

Pull the shade, if necessary, by spraying the repair with epoxy touch-up paint. If the color and sheen of the paint are not an exact match to the stall, think about spraying a wider area or even the whole stall.

Garden San Diego

Houseplants: The Way to Care for Bunny Ears

Adopting a houseplant popularly known as bunny ears seems like a creamy and warm undertaking, particularly because that the exact same plant San Diego is also referred to as angel’s wings. Bunny ears (Opuntia microdasys), also a clump-forming Mexican cactus using thornless, apartment, elliptical to circular pads, grows 2 to 3 feet tall and up to 6 ft wide outdoors. It also performs admirably as a far smaller houseplant, provided that you mimic its natural desert conditions as closely as you can.

Light, Temperature and Humidity

A place near a south-facing, unobstructed window is the most likely to fulfill bunny ears’ requirement for bright, direct sun. Windows with western or eastern exposure operate as second and third choices. Even though an actively growing bunny ears tolerates indoor summer temperatures as high as 100 degrees Fahrenheit, don’t expect it to flower if you don’t provide winter temperatures between 45 and 55 F. Regardless of the season, it likes humidity from your 10 around 30 percent range. Finally, if none of your windows supplies adequate lighting, set the plant Salting roads in winter Boston Lake City 6 inches to 1 foot under a cool white fluorescent tube for 14 to 16 hours each day.

The Pot and Growing Medium

A fantastic bunny ears growing medium must drain fast. Use a industrial cactus potting mix, or mixture your own with 40 percent sterilized houseplant soil, 40 percent builders sand and 20 percent peat moss. The best container for your own cactus is just a clay pot just slightly larger and deeper than the plant Cape Coral’s root system. It has to have drainage holes since a Salt Lake City grass with no or a Sod in San Diego that is too large, could make proper watering hopeless.

Water Requirements

As a heat-loving cactus that grows outdoors in U.S. Department of Agriculture plant Fresno hardiness zones 9 through 11, bunny ears has superficial roots adapted to getting the slightest rainfall. When confined to a pot, the roots are susceptible to rot if they’re kept constantly wet. Wait until the top 1 inch of growing medium feels dry before watering bunny ears until water flows from the container’s drainage holes. When it’s actively growing between spring and fall, regular watering is essential. Once the plant Redding enters winter dormancy, dampening the medium after every three to four weeks is enough.

Fertilizing Bunny Ears

Bunny ears gains from feeding with fluid, 20-20-20 houseplant fertilizer diluted to one-half the label’s recommended strength, which can be typically 1/2 teaspoon of fluid a 1 gallon of plain water. An option — if you are encouraging the plant Magnesium chloride snow melt Dover Lake City to bloom — is always to use 5-10-10 fertilizer. Either way, fertilize the actively growing plant Chico with every other watering. Fertilizing it more often may stimulate too-rapid growth or lead to misshapen pads. Don’t fertilize a dormant or recently potted bunny ears.

Bugs and Bunny Ears

Cottony, segmented white mealybugs and barnaclelike scale insects attach to your bunny ear pads to drain sap. To control the pests with the bristly glochids attach to your skin, dab the pests using cotton swabs dipped in 70 percent isopropyl rubbing alcohol.

Repotting Bunny Ears

Expect to repot bunny ears in a container one size larger than its current one every one or two decades. Its roots require time to recoup from the move, so wait for a week before watering it gently and moving it back into direct sun. Withhold fertilizer for no less than a month after repotting. When repotting, use rolled-up newspaper or old carpet to handle the plant Flagstaff to stop from touching the annoying glochids on the plant Flagstaff’s pads.


Info About Antique Maple Bedroom Furniture

If antique furniture could speak, each piece would inform its own interesting story. Even though you can not converse with a part of antique maple bedroom furniture, then you can do some investigative research to discover bits of historical info. Bring a little history in your bedroom space by incorporating one or more old maple pieces to your own layout.

Find Out The Way Old

Solid maple bedroom furniture is not new to the United States — in actuality, the making of maple bits dates back to America’s early Colonial days. Maple furniture has been crafted prior to well-known furniture titles, such as Chippendale, Sheraton and Phyfe, came into vogue. The early Colonists replaced the wood from oak trees with natural maple for crafting and building a variety of furniture pieces thanks to many advantages. Maple wood is tougher than oak, less inclined to split and also has a more streamlined grain, that allows a smoother furniture complete. In addition, furniture made from maple wood is lighter compared to comparable oak bits, which makes it easier to move.

Real or even an Imposter

You won’t be fooled by a piece of bedroom furniture touted as a genuine maple antique when you understand what to look for. Inspect the slice for uneven repetitive grain patterns in the wood, which frequently indicates a veneer imposter. Additionally, look for natural growth rings in the wood, as well as a darkened patina that typically builds up over time on authentic maple antiques. Run your hand over the furniture to see if it has a smooth finish, which is characteristic of authentic maple furniture. And, if you are able to smell the aroma of freshly cut wood, the piece might be genuine maple, but it’s certainly not an antique.

Bird or Tiger

Even though bedroom furniture made from maple wood long ago could not actually fly or roar, there are two kinds of maple — birdseye and tiger maple — which have names linked to bird and tiger images. Birdseye maple is grown naturally with a pattern which looks somewhat like a tiny, swirling eye, resembling the eye of a bird. This rare wood was sometimes utilized to construct bedroom furniture throughout the Victorian and Edwardian eras. The tiger maple also lives up to its name, displaying distinctive curly or wavy patterns that mimic the stripes of a tiger. Furniture pieces crafted from tiger maple crested in Colonial America during the 18th century, but you’re still able to outfit your bedroom with a lot more of these stunning antique pieces now.

Matching It Up

Whether you are seeking to create a new bedroom design by supplying the space with a whole vintage maple bedroom set or only wish to add an antique piece or two to your existing design, mixing old and new pieces can awaken intense visual appeal. As an instance, add an antique maple dresser, rocking chair or small accent table to your current bedroom as a usable reminder of yesteryear. Put a vase of fresh flowers Boise on top of the table dresser to bring the old slice back to life with vibrant energy. Refresh an antique maple furniture set with fashionable bedroom furnishings, like Roman shades for the windows, modern-day canvas wall hangings and a pristine white, plush comforter and bedding ensemble.


The way to produce an Upolstered Headboard and Footboard to Match

Customizing a headboard and footboard by upholstering them along with exactly the exact substances as you used for your window treatments adds designer flair into your bedroom. With a couple of household tools, you can finish this project over a weekend to totally alter the look of your bedroom. Provided that you are aware of how to hammer in upholstery nailhead trim at a straight line, then you’ll be surprised how great your bed can look.

Measure the height, width and length of the desired headboard and footboard to match the bed and its framework. Add 2 inches to the width on both sides so the headboard and footboard are slightly wider than the bed to look balanced after setup and the addition of bedclothes. Transfer these measurements to the plywood.

Cut the headboard and footboard about the marked measurements from the plywood using your selected saw.

Place the foam above the headboard and cut it to match using the utility or serrated knife. Repeat to your batting.

Glue the foam into your headboard by applying a coat of the spray-on adhesive on the side of the foam that rests against the plywood.

Put the batting above the foam, centering it carefully.

Measure and cut the upholstery cloth so that it folds over the edge of the headboard on all sides by at least 4 inches.

Keep the upholstery fabric in place as you turn over the upholstery. Pull the 4-inch edge of this upholstery fabric and secure it together its edge with the staple gun. Fold over the corner on the wrong side of the headboard so that one advantage neatly overlaps another. Staple in place during its edge. Pull the cloth taut because you staple all around the edge of this upholstery cloth into the plywood under.

Cut a piece of batting and upholstery fabric for the bare aspect of the headboard. Make certain to leave enough of an edge to fold over and to cover the stapled edge of fabric under. After folding the edge under the cloth, hammer the nailhead trim in place in a direct line 1/2 inch apart, pulling the cloth taut as you operate. You can set that nailhead trim 2 to 3 inches from the edge of the headboard, working at a direct line all around the headboard till you match where you started.

Repeat the headboard steps to your footboard. When complete, secure the headboard and footboard to the bed frame.