ehomeimprovement

The process for installing glass accent tiles isn’t noticeably different from other sorts of tiles, however, the easily scratched surface, inclination to chip through cutting and the transparent quality of glass shingles mean that a few special considerations are necessary. The affordability and broad variety of glass tiles makes them value the additional effort.

Narrow the Options

Consider what level of use the glass tiles will need to endure. Eliminate tiles that scratch easily if you will install them in places subject to a lot of wear and tear or require constant cleaning, like flooring or countertops. Choose a finish and look, like shiny, matte, clear, iridescent or solid, as well as size and shape. Compare the depth of the glass accent tiles into the surrounding tiles. Installation will be simpler if they’re exactly the same depth, but it is possible to build up the thin-set supporting the narrower tiles if necessary. If the surrounding shingles have been already installed, don’t pick glass tiles thicker than people around them.

Lay Out a Layout

Glass tiles commonly come in sheets using mesh backing, but it is possible to cut the mesh and use tiles individually to create your own design. Compare the size of the mesh components to your planned design to determine whether it may save time or money to adjust the size of your design to the size of the mesh. If you are creating a custom design using individual tiles or tiny sections of a mesh-backed grouping, lay the design from the planned space to be certain it fits and looks how you intended. Sometimes mesh will reveal through the rear of glass shingles, especially if they’re colorless; clear and paper-faced shingles may be more appropriate. Paper-faced tiles have a paper coating on the very front, and that you remove after putting the tile. This paper makes it difficult to see the design before placement, but eliminates the issue of mesh showing through clear glass.

Making the Cut

Wear safety equipment like heavy leather gloves and eye protection when cutting glass tiles. Use a tile cutter made especially for cutting glass for tiles that are 2 inches or smaller. For larger tiles use a wet saw. Cut partway through from the bottom, turn the tile over, and complete the cut in the top. Sand the edges as necessary to remove any remaining sharp edges.

Thin-set and Tile Thickness

Choose a white thin-set or brick for transparent glass tiles, unless you want a darker color to show through the glass. Use the thin-set into the backing and after that smooth out it, removing any texture or bubbles, which will demonstrate through tiles that are clear. In the event the glass accent tiles are far slimmer compared to the surrounding tiles, construct up the thin-set in order that the glass tiles are flush with the adjacent surface.

The proper Grout

Epoxy grout is excellent for use with glass tiles. It won’t scrape the surface, expands and contracts as required and is strong and durable. Select a shade that improves the glass shingles and doesn’t compete with or divert from them. White or ivory works nicely with most accent tiles. Avoid sanded grout, which can scratch a few delicate glass shingles.

Even though a fiberglass shower stall usually can’t bend contrary to the framing enough to decipher smoothly, the sharp and focused effect of a substantial object can be sufficient to decipher it. It’s important to repair cracks in the wall or pan as soon as you detect them, since they can permit water to leak into the framing, and it does not take long for the water to rot the wood. An epoxy repair program works best for wall repairs, yet to repair a cracked pan, then you should rely instead on a custom-made add for strength.

Put on goggles, a respirator and gloves, and turn on the Designer Bathroom Concepts Pittsburgh exhaust fan. Grind a bevel about 1 1/2 inches wide centered on the crack with a rotary instrument and an 80-grit sanding attachment. The purpose of the bevel is to provide surface area to that the fiberglass repair tape can stick.

Lay cellophane tape across the boundaries of the bevel to keep the repair materials off the undamaged surface of the stall.

Mix epoxy fiberglass repair leaf using the hardener that comes with it from the proportions recommended by the producer. Spread it inside the bevel with a little paintbrush.

Cut a piece of 9-ounce fiberglass cloth from a roll that’s wide enough to fill the bevel, wet down it with the epoxy and then lay it about the crack. Cut a smaller piece of tape, wet it down and lay it on top, then lay an even smaller slice on top of that one. The last piece of cloth should come flush with the surface of the stall.

Permit the epoxy to cure overnight, then blend enough two-part polyester fiberglass filler to cover the repair. The filler is similar to auto-body filler. Choose a shade that fits the shower stall. Mix it with hardener and then trowel it on with a plastic putty knife. Let it cure for 20 to 30 minutes, then sand it flat with 120-grit sandpaper.

Pull the shade, if necessary, by spraying the repair with epoxy touch-up paint. If the color and sheen of the paint are not an exact match to the stall, think about spraying a wider area or even the whole stall.

If antique furniture could speak, each piece would inform its own interesting story. Even though you can not converse with a part of antique maple bedroom furniture, then you can do some investigative research to discover bits of historical info. Bring a little history in your bedroom space by incorporating one or more old maple pieces to your own layout.

Find Out The Way Old

Solid maple bedroom furniture is not new to the United States — in actuality, the making of maple bits dates back to America’s early Colonial days. Maple furniture has been crafted prior to well-known furniture titles, such as Chippendale, Sheraton and Phyfe, came into vogue. The early Colonists replaced the wood from oak trees with natural maple for crafting and building a variety of furniture pieces thanks to many advantages. Maple wood is tougher than oak, less inclined to split and also has a more streamlined grain, that allows a smoother furniture complete. In addition, furniture made from maple wood is lighter compared to comparable oak bits, which makes it easier to move.

Real or even an Imposter

You won’t be fooled by a piece of bedroom furniture touted as a genuine maple antique when you understand what to look for. Inspect the slice for uneven repetitive grain patterns in the wood, which frequently indicates a veneer imposter. Additionally, look for natural growth rings in the wood, as well as a darkened patina that typically builds up over time on authentic maple antiques. Run your hand over the furniture to see if it has a smooth finish, which is characteristic of authentic maple furniture. And, if you are able to smell the aroma of freshly cut wood, the piece might be genuine maple, but it’s certainly not an antique.

Bird or Tiger

Even though bedroom furniture made from maple wood long ago could not actually fly or roar, there are two kinds of maple — birdseye and tiger maple — which have names linked to bird and tiger images. Birdseye maple is grown naturally with a pattern which looks somewhat like a tiny, swirling eye, resembling the eye of a bird. This rare wood was sometimes utilized to construct bedroom furniture throughout the Victorian and Edwardian eras. The tiger maple also lives up to its name, displaying distinctive curly or wavy patterns that mimic the stripes of a tiger. Furniture pieces crafted from tiger maple crested in Colonial America during the 18th century, but you’re still able to outfit your bedroom with a lot more of these stunning antique pieces now.

Matching It Up

Whether you are seeking to create a new bedroom design by supplying the space with a whole vintage maple bedroom set or only wish to add an antique piece or two to your existing design, mixing old and new pieces can awaken intense visual appeal. As an instance, add an antique maple dresser, rocking chair or small accent table to your current bedroom as a usable reminder of yesteryear. Put a vase of fresh flowers Boise on top of the table dresser to bring the old slice back to life with vibrant energy. Refresh an antique maple furniture set with fashionable bedroom furnishings, like Roman shades for the windows, modern-day canvas wall hangings and a pristine white, plush comforter and bedding ensemble.

Customizing a headboard and footboard by upholstering them along with exactly the exact substances as you used for your window treatments adds designer flair into your bedroom. With a couple of household tools, you can finish this project over a weekend to totally alter the look of your bedroom. Provided that you are aware of how to hammer in upholstery nailhead trim at a straight line, then you’ll be surprised how great your bed can look.

Measure the height, width and length of the desired headboard and footboard to match the bed and its framework. Add 2 inches to the width on both sides so the headboard and footboard are slightly wider than the bed to look balanced after setup and the addition of bedclothes. Transfer these measurements to the plywood.

Cut the headboard and footboard about the marked measurements from the plywood using your selected saw.

Place the foam above the headboard and cut it to match using the utility or serrated knife. Repeat to your batting.

Glue the foam into your headboard by applying a coat of the spray-on adhesive on the side of the foam that rests against the plywood.

Put the batting above the foam, centering it carefully.

Measure and cut the upholstery cloth so that it folds over the edge of the headboard on all sides by at least 4 inches.

Keep the upholstery fabric in place as you turn over the upholstery. Pull the 4-inch edge of this upholstery fabric and secure it together its edge with the staple gun. Fold over the corner on the wrong side of the headboard so that one advantage neatly overlaps another. Staple in place during its edge. Pull the cloth taut because you staple all around the edge of this upholstery cloth into the plywood under.

Cut a piece of batting and upholstery fabric for the bare aspect of the headboard. Make certain to leave enough of an edge to fold over and to cover the stapled edge of fabric under. After folding the edge under the cloth, hammer the nailhead trim in place in a direct line 1/2 inch apart, pulling the cloth taut as you operate. You can set that nailhead trim 2 to 3 inches from the edge of the headboard, working at a direct line all around the headboard till you match where you started.

Repeat the headboard steps to your footboard. When complete, secure the headboard and footboard to the bed frame.

The outside walls of modern homes are filled with insulating material to increase relaxation and maximize the efficiency of heat and cooling system. Single and even dual-pane windows common to most families have a lower resistance to thermal motion. But scientific information illustrates that properly positioned thermal drapes will help keep your home warmer over winter nights and cooler during hot summer days.

Thermal Imaging

Through a power audit, infrared cameras show a striking temperature gap between the walls of your home and undraped windows. Thermal imaging proves that even ordinary curtains can help cut the heat reduction from your windows, and thermal drapes perform measurably much better. Most hardware stores and home centers permit you to rent a professional grade thermal video camera or electronic thermometer so that you may perform your own energy audit.

Thermal Drape Design

A thermal drape also needs to add beauty to a home’s decor, but it is what’s within the curtains that count. A straightforward two-layer curtain — not a real thermal drape — is composed of this decorative fabric that faces into the room, backed by a coated fabric facing the glass. A three-layer curtain features a middle layer of insulating cotton or silicon batting that adds mass to the drape and reduces light transfer and insulates against exterior traffic sound. High-quality fully insulated thermal drapes contain a fourth layer, a steam barrier to avoid the motion of moisture into the room from window condensation.

Thermal Drape Fitting

For thermal drapes to be effective, they have to fit snugly across the window — left, right, bottom and top. Permit the drapes to get the walls along with the windowsills or move all of the way to the ground Fresno — and to get maximum efficiency — install a pelmet or cornice over the drape hardware to prevent air flowing down at the surface of the window. During winter, keep the drapes open in daytime hours to permit sunlight in and permit the inflow of heat in prying heated window glass. Completing the drapes following dark minimizes the transfer of indoor warmth to the chilly outdoors.

Thermal Drape Effectiveness

While properly installed thermal drapes are effective at lowering heating Sacramento repair specialists and heating Sacramento repair specialists expenses, it’s difficult to predict just how much energy you can expect to save. Construction insulation is quantified by its R-value — that explains a material’s resistance to heat flow. The best thermal drapes can raise a dual-pane window’s powerful R-value rating to up to 4.0 or higher, depending on the layers at the drape and the installation while at the same time blocking any air leaks that create unpleasant drafts.

If you’ve got a sheet of Anglo-Indian rosewood furniture, then it’s probably an antique, and also one of those cardinal rules when restoring an antique is to do as little to it as possible. The furniture was probably manufactured for British colonists at 18th- or 19th-century India and features a mixture of Indian and British cultural fashions. It’s often ornately carved and completely lavish in design. As it’s made from rosewood, which is an oily wood, it could have little or no finish, and while it’s best not to change that, dried and faded wood may need to a help.

Make any needed structural repairs into the furniture before working on the finish. These repairs might consist of gluing legs with carpenter’s glue and smoothing any places on carvings that have chipped, using a chisel. Avoid sanding the wood — any places you sand will discard their patina and appear faded and scratched compared to the remainder of the piece.

Mix a hot wash to wash the furniture if it is soiled. Pour a gallon of warm water to a bucket and then add 2 tbsp of turpentine and 4 tbsp of boiled linseed oil. Soak a cloth in the solution and wipe dirt and dirt off the wood. Turpentine loosens grease while olive oil eliminates the natural oils that you remove by washing.

Remove stubborn materials, like soot and wax, by soaking a cloth with mineral spirits and massaging the affected areas.

Wipe the slice dry with a clean cloth and scrutinize the wood. If it appears dry or washed out, you may choose to provide it a thin, protective finish to restore its natural shine. A diluted shellac solution works best for this particular.

Dissolve 3 pounds of white shellac at a 50 percent solution of denatured alcohol. Brush it on the wood with a paintbrush or spray it with air spray equipment. Allow the shellac dry, then apply another coat if needed.

Prepare a solution of 4 components alkyd varnish to 1 part mineral spirits or turpentine to finish the top of a table that requires extra protection. Many Anglo-Indian tables have veneered tops made from padouk, mahogany or any other exotic hardwoodfloors You can use the varnish to guard the veneer while departing the rosewood with nothing but a mild shellac seal.

Scatter liners on the table with a brush, allow it to dry for 24 hours, then then sand it lightly with 220-grit sandpaper and apply another coat. Repeat if needed. Let the last coat cure for three or four days before using the table.

Anaglypta is a cotton fiber and paper pulp raised-design wallpaper that may be pasted to walls or ceiling and painted or left in its natural white state. It supplies a decorative finish which could mimic elaborate flocking or pressed tin ceiling tiles. Hanging it presents a few challenges as the paper is heavier than standard wallpaper and also — while the increased pattern is resilient — you can not apply too much pressure when smoothing it down.

Clean and repair the walls to be painted, filling in any cracks and removing any peeling paint or old wallpaper remnants.

Prime or hang liner paper on the walls that’ll be dealt with in anaglypta. Lining paper is broader than standard wallpaper rolls to prevent seam overlap, and provides a secure gripping surface for the heavier, decorative anaglypta. You can adhere anaglypta to just a primed finish, if you would like.

Center a bold pattern on the anaglypta on the most apparent wall — the one you see when entering the room or also the section over a chimney breast, like. For a more small repeat pattern, assess the wall length commencing at the most well-lit corner and cut the first length of paper a minimum of two inches longer than needed to permit for trimming and pattern matching.

Apply strong adhesive paste to the wrong side of the length of wallpaper. Work from the middle of the paper toward the exterior to avoid getting paste on the front of the anaglypta. Use a paste recommended for hanging heavier, ornamental newspapers like anaglypta. Book the paper by folding it, pasted sides together, from bottom to middle and top to middle. Permit the pasted paper sit for a couple minutes so that the glue is absorbed.

Preserve up the paper the ladder folded loosely — do not crease it — then unfold it and paste it into the wall. Hang the paper in the ground Boise down, trimming the bottom and top and tamping down the edges gently with the back of a wallpaper brush. Don’t smooth the paper level to the wall with any pressure which could crush the patterns that are raised. Match the next length of paper into the sheet hanging on the wall to ensure that the design lines up correctly, and repeat the cutting and booking procedure.

Paint or faux finish the anaglypta to coordinate with your decor, when the wallpaper has dried in position. Anaglypta is quite sturdy but you ought to avoid unnecessarily saturating or overloading it with finishes or paint, without adequate drying times, therefore it will remain securely fixed to the wall.

A zebra-skin rug is an exotic accent piece for any room in your home. If used as a floor covering, then your zebra hide may get dirty and stained. Instead, display the rug by hanging it on the wall. Mounting the mask on the wall is really the best method to preserve it and keep it clean.

Mounting a Zebra Rug

Mount the zebra-skin rug between two pieces of glass to avoid damaging the delicate mask. If you press the mask closely between the fence, it wo not slide around or drop down; you shouldn’t need adhesives to maintain the rug set up. When you’ve attached the rug between glass, set the enclosure at a photo frame. A professional framing business might also be able to do this for you. You can hang the frame on the wall. Use a wall anchor, including a winged or screw anchor, for plaster or drywall. Polyethylene expansion anchors work for brick walls. Tempered steel grips, which screw in the wall, are another option. These grips grasp the edges of the rug and hold it in place without puncturing the mask. Don’t hang the zebra rug with nails or staples; doing so will damage the mask.

Bow windows bend elegantly outward in the interior of your home, containing four to five openings versus a bay window’s three. Some bow windows have ample distance to install rods and hues straight above the windows, while some need you dress the exterior the opening. In case the ground Chico in front of the window comes with a padded seat or bench outfitted with pillows, then coordinate the window treatments to the upholstery already set up.

Innovative Drapery

Bow windows flow as one, which makes installing panels above each individual window hard. Rather, secure a decorative curtain rod over the opening to the window; because of the feature’s dimensions, a thicker pole appears best. Mount it so it goes well past the opening — around 12 inches on each side — allowing you to pull back the panels to reveal the entire space. Hang panels across the pole, allowing for 1 1/2 times the width of the opening in panels. Allow the panels to break right at the ground Flagstaff or puddle slightly for your visually pleasing appearance. Too-short panels surrounding a massive bow window often look misplaced.

Whimsical Sheers

Sheers installed straight over every individual window in the bow allow plenty of lighting to flood the room when preventing the unpleasant look created when curtains are installed in exactly the same method. Safe curtain rods above every individual window, curving them round the bow; rods that connect and flow together using the lines of the window produce the most seamless look. To get a thicker impact without perfectly sized rods, elect for rosettes. Install them evenly across the bend over the windows and secure the sheers to them together with clips. For more privacy, add drapery to the opening of the bow window. To get a soft, airy look, or if there isn’t enough room over the windows to install rods, install sheers beyond the opening in the same manner that you would install panels that are thicker. This frames the window without overpowering it, keeping it as the focal point rather than the window treatments.

Strategically Mounted Shades

Heavy draperies, and even a few sheers, may add too much volume to bow windows in certain spaces, creating an imbalance in the room. Individual shades over every section of glass, mounted outside the window molding, provide light and privacy control when creating a completed look. To get a seamless effect, size the colors so that the headers butt up against one another as they flow across the windows. Bamboo blinds control lighting and include texture, and lined versions provide privacy. Roman colors in a decorative print open up your color choices. To get a more separated effect, put in the colors so they’re within the window molding, treating every single section of glass as a separate slice.

Letting from the Light

Even the sheerest drapery or shade filters mild when it’s closed, limiting one of the bow window finest features: its capacity to drench a room in sunlight. For privacy without conventional window treatments, outfit the glass using privacy window film. These products can easily be applied with soapy water and are not permanent, enabling you to change your mind in case your decorating preferences shift. Frame the window using panels installed across the exterior of the bow if needed, or add color with a valance running interior the opening and over the windows. Shutters provide an alternative to movie, allowing you to privacy when desirable yet plenty of lighting throughout the day. Coordinate the style of the shutters to the style of the wood trim around the windows to get the very best results, for example, color and texture of the slats. Most companies provide free samples of shutter finishes, which makes finding a match easier.