How to Improve Welding Safety

handyman services Pueblo CO know that it’s very important to apply relevant welding safety measures regardless of whether they’re performing small-scale or large-scale welding tasks. That’s because the risks associated with welding are the same no matter how big or small the job, which is why we’ve got some actionable tips that you can use now to protect yourself and your employees from some of the most common welding dangers.

Read the Manual

This might seem obvious but you’d be surprised at how many people ignore this tip. Make sure you read the operating manual of the welding machine that you’re working with so you can understand how to operate it, what its limits are and the safety measures that you should take.

Wear Protective Gear

Never start a welding job without putting on your gloves, helmet and protective clothing. Also, avoid wearing short-sleeved shirts or shorts, and stick to flame-resistant clothes like a welding jacket, denim pants etc.

Protect Your Eyes

Make sure to put on your welding helmet along with safety glasses underneath to protect your eyes from a condition known as “arc flash” which can be very damaging to your eyes.

Get Some Clean Air

Welding gives off toxic fumes and gases that fill up the entire space where you’re working, which is why an exhaust hood is a really good investment to make as it cleans the air and makes the space breathable again. You might also need to use respirators, depending on the materials that you’re working with, so be sure to check the manufacturers welding electrodes datasheet.

Wear the Right Shoes

The best shoes for handyman services Pueblo CO are high-top leather boots. Make sure you layer pants legs of over the shoes for maximum protection.

Auto-Darkening Helmets

Invest in auto-darkening helmets to reduce fatigue while you’re welding and to help you meet your production time goals. You should get an auto-darkening helmet that conforms to ANSI standard Z87.1-2003, or whichever one is the latest standard.

Avoid Repetitive Stress Injuries

There are certain small changes that you can make to reduce your chances of getting stress injuries. For instance, you can reduce your chances of getting neck fatigue by using an auto-darkening helmet instead of a traditional, fixed shade helmet.

Use Boom-Mounted Wire Feeders

If you’re a welder who works in a high-production welding station, then you should definitely get boom-mounted wire feeders, as they’re more comfortable, efficient and flexible than any other alternative.

Keep Your Workspace Clean

Store all your welding equipment in clearly labelled containers and compartments and make sure that you put everything back in its place after you’ve finished using it. The only items you should have on your weld area are the equipment that you’ll be using. Consider investing in a weld table that can adjust to a handyman Pueblo CO’s height to make your work easier and more comfortable.

Use Fixturing

Use a simple gearbox to minimize any risks as it’s able to rotate a 2, 200-lb. component without having to use a chain and hoist.


How to Hang Curtains Yourself

Dressing up windows using curtains can completely revamp the décor in your living room or any other part of your home. There are so many different types of curtains in the market most of which come with unique designs. In case you are planning to purchase a few, then you must also learn how to hang them. The beauty of any curtain will totally depend on how it’s been hung.

Well, you don’t need to be a handyman Orange County to hang curtains correctly so here are some tips to keep in mind:

What You Will Need

Before you begin the job, there are some tools and supplies that you will need. First, get a curtain rod with brackets. You will also need some screws, a level, paper, pencil, tape measure, a screwdriver, and some wall anchors although they are not really necessary.

Measuring Curtain Panels, Brackets, and Rods

As you begin hanging up your curtains, you must make sure you have the right measurements for the rods, panels, and brackets. Start by measuring the total height right from the floor to the window frame. This will determine the size of the curtain that you need. Ideally, curtains should touch the floor and that’s why the measurement needs to be from the floor to the frame.

Secondly, you need to decide where the curtain rod will be hanged. The rod should normally be six inches above the window frame. Try to also measure the total depth of your windows. This will help you determine the size of curtain brackets to go for. Curtain brackets must extend beyond the window depth. As for the panels, the modern practice is to ensure that they are at least as wide as the width of the window. This will make it easier for the curtain to hold in place and to cover the entire window.

How to Hang Curtain Brackets

As soon as all the measurements are in place, it’s now time to hang the brackets. Any Orange County handyman can do this job in a few minutes. But it’s still important to have the right guide. The first thing here is to measure up the size of curtain panels using a tape measure. Use the pencil to mark curtain bracket placements at least six inches away from the window frame.

Once the marks are made, you will now install the curtain brackets. Use the screwdriver you already have to do this. The brackets on either side of the window frame must be leveled. Don’t hang the curtains until you are sure of this. Use the level to get this done. Finally, go ahead and place the curtains on the rod. This should be an easy thing for anyone. Once the curtains are on the rod, hang them on the brackets and that’s it.

Hanging curtains on your own is one of the easiest DIY projects you can do at home. You don’t really need to be a handyman Orange County CA for this. The simple guide above can help even people who have never hang curtains before get the task done.


4 Expert Tips For Raising Your Home Appraisal

When you are refinancing or selling your home, handyman Orange County is part of the entire process. A home appraiser’s job is to determine a property’s worth in relation to the current market. This means that the cost of your home today is likely to be different from what you have paid for it.

If you are fortunate enough, your home’s value will have risen during the entire duration you have lived in it. This will make the sale profitable or the refinancing easier. On the other hand, if the appraiser sets a value that’s lower than the amount you’ve originally paid for the property due to certain circumstances like a recent real estate slump, then you will surely be facing problems in recouping your money by the time you are approved for a brand new mortgage or when you sell it.

Of course, Orange County handyman has to be objective. An appraiser looks for many different factors that can affect a home’s value like its condition, amenities, materials, and square footage. Once they are carefully assessed, the professional will research comps or comparable properties that have been sold within the area recently in order to identify the market value.

In other words, it’s unlikely that you will be able to charm the appraiser of your home into thinking that the property is worth more than it actually is. Save yourself the trouble and don’t think about putting fresh-cut flowers Phoenix on your dining room table. Also, cookies in the oven won’t shoot up the value of your home unless you are showing the entire place to a potential buyer.

What you can do to ensure your home’s appraisal value is as high as possible is to keep in mind the tips listed below:

Gather Your Own Comps

If you know several homes that are similar in the neighborhood and have sold recently, then don’t hesitate calling them to the attention of the appraiser. The professional may not be familiar with the area and may miss certain comps that would have worked to your benefit. The likely scenario is that the appraiser will appreciate your help.

Spruce It Up

De-clutter, give your walls a fresh coat of paint and make minor repairs if necessary. Even if you are just refinancing, you would not want messy desks and dirty dishes to be immortalized in the photos that will be taken by the appraiser.

Don’t Neglect Your Home’s Exterior

Even before the professional reaches your door, he or she will be taking notes. If you have a yard, a little tidying up will already go a long way. Tear out the dead bushes or trees in the area as they can detract the appearance of your home. If your walkway needs repair, make sure it’s sorted before the appraiser arrives. Put numbers on your mailbox and seal your driveway as well.

Point Out Major Improvements

If you’ve just replaced your roof, mention it. However, don’t expect that doing major improvements will increase the resale value of your home as only a few projects can recoup every penny that’s been invested. We suggest that you replace your entry door with one that’s made of steel as it has proved to help homeowners to at least break even.