One nice thing about owning a distressed table isn’t having to worry about dinging or denting it. Distressed furniture has a look that brings design or country charm to your decor. And a desk — a secondhand-store locate or that old table from the attic — doesn’t take a lot of ability to get it to look great. As long as you start with a solidly built piece of furniture, then you can distress end, a kitchen or a coffee table and cover it with the finish of your choice very quickly.
Clean It First
It doesn’t matter what size table you intend to distress is the same — wash it. Dirt doesn’t while used and abused furniture that is distressed looks OK, and a filthy distressed table does not allow for the finish to correctly seal. If you’re planning to paint or stain the item, remove using a agent in a room that is well-aired, before you begin, or sand the old stain in places away. Eliminate and wash with a mild mix; rinse clean and wipe dry.
Paint or Stain It
A distressed table can be painted or stained unless you intend to leave its normal color to the table; then you’d skip the paint or stain stage. If you plan on using chalk or milk paint, primer isn’t needed by you, but if you’re planning to just paint it, cover it using primer. As the other layers will probably show through after painful, you can choose to add over 1 coat. You may also paint it a color that is dark and cover with milk paint that lets some of the areas that are darker to show through if you are finished. After painting, then wipe off a few of the paint before it is dry to give a look to it.
Distress It
The step that is painful may be the part of the project. You can distress the table by hitting it with a hammer, a heavy chain or scratch lines into it using a nail or other object along its upper and edges. Sandpaper also works to wear areas down, particularly if you’ve selected the appearance that is painted distressed. Of distressing you increase the table, the amount depends on your preference. However, be certain that you cover the side panels beneath the tabletop, if any, the entire tabletop, and the legs with quantities. You can’t really make a mistake with debilitating; the entire look is based on imperfection.
The End Coat
The finish coat protects the timber and the appearance you created. For a desk that is painted, use a paste wax to seal it. Rub on paste wax in motions; let it sit and buff to a sheen. For stained tables, make use of a polyurethane or varnish in a mattesheen or product, based on the way you would like it to look. Than once you use a low-sheen or matte finish, the high-gloss finish coat show more of these imperfections. Wear protective equipment and work in an area that gets a great deal of clean air when working with polyurethane and varnishes.
